|
|
Galfer Front Lines & Pads Combo
2 LINE RACING FRONT KITS >> REPLACES OEM 3-LINE FRONT KIT
Galfer Brake Line kits are made with Dupont Teflon Steel braided cable. There are 16 braided lines of steel around the inner section, making the line expansion close to zero under all conditions.
Galfer brake lines come with a lifetime warranty. Color fade, hazing, even crashing your bike will not void the warranty. Simply contact Galfer directly, supply some information,and get your new line!
Galfer hose meets or exceeds the following tests and requirements: SAEJ 1401, UNE 26-399-89, ISO 3996. Temperature range : -67/ +464(f). Braking power, Galfer lines will require less pressure at the brake lever to stop the bike, allowing the rider to use less force and stop faster.
All Brake lines are coated the entire length of the line to protect the bike from scratches and the brake fluid from humidity.
All Galfer pre-made brake line kits include all the necessary banjo bolts and washers..
Galfer Braided Brake Lines are available in these different colors:
Clear, black, blue, orange, yellow, green, and red. IMPORTANT: Any color combo except clear-over-silver with silver fittings is a special order and will take about 7-10 days before it ships out!!
NOTE: All banjo bolts supplied with Galfer kits should be torqued to 13-15 ft-lbs.
GALFER HH BRAKE PADS
The 1396 HH compound is a sintered bronzed base material that includes graphite and advance ceramics. The ceramic content means HH friction rating WITHOUT the high level of other compounds that will early-wear your expensive rotors, and ceramics are widely used for the heat dissipation properties! It will provide instant powerful controlled braking force at any speed or temperature, rainy or dry weather. Great lasting power.
Fade free, long lasting, superior sensitivity, and incredible braking power.
Pads are normally sold in pairs. In the combo kit, for a bike with dual front rotors we include TWO pairs, or four pads total. (8 pads for the 4-pad applications like 04 ZX10R, etc)
BREAK IN PROCEDURE:
All Galfer compounds are to be "break-in" lightly for the first 2 or 3 laps, or 40 miles of street riding. All rotors must be cleaned before new pads are to be install, especially those rotors that were using HH metallic pads prior to installing new Galfer organic pads.
MOTUL Dot 5.1 brake fluid (compatible with DOT3 and DOT4!)
LONG LIFE 100% synthetic fluid for hydraulic actuated-brake and clutch systems.
DOT 5.1 NON-SILICONE BASE.
Fluidity specially designed for anti-locking brake systems.
LONG LIFE FORMULA : the high wet boiling point (185�c/365�F), superior to DOT 4 and DOT 3 fluids enables to use this product longer.
Its viscosity (820 centipoises at -40�c / -40�F) lower than DOT 4 and DOT 3 brake fluids, allows MOTUL BRAKE FLUID DOT 5.1 an easier fluid circulation in micro-valves
PERFECTLY NEUTRAL WITH SEALS USED IN BRAKING SYSTEMS. ANTI-CORROSION.
STANDARDS : FMVSS 116 DOT 5.1 NON SILICONE BASE & DOT 4 & DOT 3
SAE J 1703
Todd Says: "With all the focus on power which only helps in a straight line, braking advances are often overlooked. Well I can tell you that this is one of the BEST ways to increase your personal riding performance and give you confidence in your bike's stopping power! I use this kit, and I love it on my bikes!"
Only: Call/Email for Sale Price
STEP ONE: SELECT LINES
STEP TWO: SELECT HH BRAKE PADS
Select Model:
STEP THREE: BRAKE FLUID
Add .5L Motul 5.1 Brake Fluid (+$6.50):
|
|
